Clean Grease Traps for Proper Maintenance

Steps to Clean Grease Traps for Proper Maintenance

Grease traps are installed to keep your kitchen free from grease accumulation. A constant flow of grease, especially from the commercial kitchen, can ruin the sewer pipes causing a lot of issues in the long run. On the other hand, grease traps need to be cleaned or a regular basis so that they can perform aptly and do not produce a foul smell later. Here is how you can clean grease traps easily.

Steps to clean grease traps

There are different types of traps used based on size and location. You need to have a clear idea of what kind of trap you are using. Weekly cleaning will help any trap to perform excellently. Here are the steps to clean a grease trap you will find quite insightful.

 

  • Removing the lid

 

When you are about to remove a lid on the trap system, just make sure you maintain safety and caution. The lids come with gaskets that trap obnoxious gasses forming due to the decomposition of grease inside the tank. Remove it gently to keep the gaskets safe.

 

  • Depth measurement

 

Use a stick or a ruler to find out the depth of grease accumulated inside the trap. In most cases, the level of grease needs to be mentioned in a FOG report as a standard protocol for eateries. Measure the depth and calculate how much time you have to invest to clean it.

 

  • Removing water

 

The water floating on the deposited grease below needs to be removed carefully. You can either use a bucket or a small pump to draw out accumulated water and exposing the grease below.

 

  • Scooping grease out

 

You can either use a shovel or a bucket to remove grease. If the sediment is stubborn, you will have to use other measures to get rid of the mass such as a heavy-duty scooping instrument.

 

  • Scraping the bottom

 

Even if you manage to remove grease from the trap, you will have to scrape the bottom and sides of the tank properly. Grease tends to deposit, stick, and form a tough layer on the walls to remove. It is quite challenging when you do not have the right tools or expertise to do it. This step will help you to stop the quick building of such mass inside a trap.

 

  • Reinstallation

 

Once you have completed cleaning the entire trap, make sure that you have put all the removed parts at the right place. Place the lid and cover the trap properly.

Final words

If you want to get rid of this regular task, you can hire a professional grease trap cleaner.

Leave a Reply

Your email address will not be published. Required fields are marked *